XTC Power Products Leads the way in UTV wiring. Installing turn signals on a UTV is easier than ever with our Plug and Play Turn Signal System for the Polaris General. The TSS (Turn Signal System) consists of a relay control box and horn that mounts under the hood and turn signal; and custom hazard/horn switches that mount in the dash. A supplied vehicle-specific rear harness integrates into the Polaris Generals OEM taillights converting them to turn signals.
Polaris General Plug & Play Turn Signal System with Horn Features:
- Plug and Play Easy Install
- Plugs into OEM Brake Light Harness; using Factory Brake Lights
- Comes with Front 3/4″ – 3 LED Turn Lights
- Laser Etched LED Lit Turn Switch
- Emergency Hazard Switch
- Rear Power Out for optional license plate light
- Automotive Horn and Push Button
- Made in the USA!
| Dimensions | 11.25 × 8.75 × 4.25 in |
|---|
How the TSS Works
All TSS part numbers include a marine-grade rocker switch with laser-cut directional arrows that flash red when activated. When you press the turn signal rocker switch; the TSS will activate the turn blinker; returning the switch to the center position cancels the blinker. Each TSS has a vehicle-specific harness that plugs inline with the rear factory taillight harness. The brake light signal passes through the TSS. As a result; the opposing brake light still functions normally while the activated turn signal brake light flashes.
Also Included
Also included in our Plug and Play Polaris General turn signal kit is a & Hazard/Horn’ rocker switch. Pressing the top & Hazard side of the actuator will turn on the hazard lights; returning the switch to the center position deactivates them. Furthermore; pressing the lower portion of the custom rocker switch will activate the included street-legal FIAMM horn. A front harness is supplied that includes two Maxxima 3/4 & Prime Amber LED lights that mount in each corner by drilling out a whole. Additional lights and splitter are sold separately for those looking to expand their setup.
Hands-on with the TSS Polaris General Turn Signal Kit
Unlike our competitors; all TSS kits include an auxiliary power out for a license plate light or whip lights. Moreover; the aux power is good for powering our 6 & Prime LED-Lit License Plate Frame. Above all; each system comes with a vehicle-specific power connection. Without a doubt; it’s easy to install with no wires to cut and no crimping. Everything needed to integrate with your vehicle's OEM brake light harness included. Unplug the rear light harness; plug in ours; and enjoy. XTC Power Products; made in America and Wired For Fun®!
