The Suspension Upgrade You Need:
Your Polaris General was built for working hard and playing harder. But sometimes; that stock suspension just isn't up for the task at hand. That's why SuperATV designed these High Clearance 1.5” Rear Offset A-Arms. The unique bend design delivers extra clearance and the rear offset extends your wheelbase; allowing you to run bigger tires without even installing a lift kit! And if strength is what you need; you're in the right place. They're made with 1.25” tubing that's not only larger; but also more dependable than your stock arms. You're not getting the most out of your General until you've upgraded with SuperATV.
No More Getting Hung Up:
Would you rather have some additional ground clearance or room for bigger tires? With our rear offset A-arms; you get both! The unique bend design delivers an extra 1.5” of ground clearance; and a 1.5” rear offset extends your wheelbase. Not only does this give you room for bigger tires; but it will provide more stability to your machine; too. Installing these A-arms on your General will have you sailing over the obstacles that used to get you down.
Stronger; Smarter Design:
We make these rear control arms using 1.25” tubing to ensure that they're not only bigger; but also stronger than your stock arms. They're finished with a durable powder coating that makes them more durable; long-lasting; and good looking. We also include UHMW bushings for free; and they're preinstalled! These self-lubricating bushings are nearly indestructible and virtually frictionless; so you can stay riding for longer. You'll save time; money; and hassle.
All SuperATV A-arms come with a lifetime warranty; allowing you to ride as hard as you want without worry about breaking something. No matter what happens; SuperATV has got you covered.
Industry-Leading Adjustable Pivot Blocks:
Your rear offset A-arms also come with industry-leading adjustable pivot blocks. Being able to adjust your alignment gives you total control over your camber; so you'll never have to worry about premature tire wear; no matter how hard you ride. We make sure they're preadjusted to stock specifications right out of the box; so you only have to mess with them if you want to.
Learn more about what camber is; how it affects your ride; and how to adjust it perfectly.
*****NOTE: Installation requires drilling two 12mm holes in the rear A-arm. See instructions for details.*****
High Clearance 1.5" Rear Offset A-Arms Features:
- Adds 1.5” of rear offset
- Fit up to 28” tires with 0” offset front A-arms
- Fit up to 32" tires with 1.5" offset front A-arms
- 1.25" tubing is 25% larger than stock
- Adjustable pivot blocks for full camber adjustability
- Includes high-quality UHMW bushings at no extra cost
- UV-resistant powder coat finish
- Easy to install
- Backed by a lifetime warranty
