The Rockford Fosgate Element Ready Amplifier - The amplifier features the next level of Element Ready™ design from Rockford Fosgate that’s built as rugged as the outdoor environment it’s used in. The IPX6 rating is provided by a water tight seal featuring splash guards on both ends and heavy-duty molded harnesses with integral sealing gaskets. A new PRESET switch - for use with Rockford Fosgate UTV audio kits - eliminates the need to set-up and tune the amp for the best experience possible. Built on the popular TM series; amplifiers feature the same great technologies like Constant Power; Class-AD and C.L.E.A.N.; all engineered; developed; and validated in Tempe; Arizona.
Rockford Fosgate amplifiers are known world-wide for producing more power than their ratings suggest. The amplifiers are the first series based on new industry standard Dynamic Power ratings; bringing their conservative ratings to the forefront. Engineered from the ground up and purpose-built to deliver more output where you actually hear it; this is real dynamic power that performs not only on paper; but performance heard through the musical experience. You’ll see two amplifier power ratings; the traditional Continuous Power output; and the new Dynamic Power output; both tested in accordance with the CTA-2006 specification. Consider Continuous Power as wattage developed on the test bench for comparison against other amplifiers in the same class; and Dynamic Power as real-world wattage when connected to a speaker load; listening to music. Either way you look at it; Rockford Fosgate is proving-once again-these amplifiers are powerful enough to drive any speaker or subwoofer you throw at them.
Element Ready Amplifier Features:
- Element Readyâ„¢ with integrated harnesses for a watertight seal.
- PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits.
- Play all day; easy to integrate; and keep music playing for extended lengths of time.
- C.L.E.A.N. input/output clip detection and indicator LEDs.
- Constant Power provides instantaneous delivery of output over varying impedance loads.
- Focused mass heat sink allows critical aluminum material to be located around hottest internal devices.
- Top mounted control panel with waterproof smoked lens.
- OEM and aftermarket radio integration inputs.
- Low Impedance Stability.
- Proprietary testing using RATS (Rockford Automated Testing System).
- Proprietary Class-AD technology allows amplifier to produce more power with less current draw.
- Class-BD technology provides 75-80% efficiency over traditional class A/B designs.
- Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk.
- MESHA 4 reduces MOSFET temps; lowers distortion; increases durability and prolongs device life span.
- Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise.
- Balanced Differential Inputs eliminates noise picked up by signal cables.
- Remote-Out feature when using high level inputs.
Specs:
- CEA-2006 Compliant:Yes
- Number of Channels: 5
- Total Power: 1500 Watts
- Bridgeable: Yes
- Frequency Response: 10 Hz - 50 kHz
- Input Sensitivity: Low-Level: 150 mV - 4 V / High-Level: 450 mV - 12 V
- Circuit Topology Class: Class-AD
- Efficiency (average): 75%
Signal Input:
- Low-Level: 4 RCA.
- High-Level: 4-Pin Molex.
Tone Controls:
- High Pass: 12.5 kHz @ 14dB/Octave Butterworth.
- Low Pass: 45 Hz @ 18dB/Octave Butterworth.
Crossover Controls:
- Remote Controls:No
- Visual Indicators Power: Blue / Protect: Red / Input Clip: Red / Output Clip: Blue/Red
- Power Wire Gauge: 8 AWG
- Power Input Connector: Compression Terminal Block
- Speaker Wire Gauge: 16 AWG
- Speaker Output Connector: 4-pin Molex to tinned bare wire
- Cooling: Convection
- Heatsink: Die Cast Aluminum
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse: 200 A
- Average Current Draw: 29 A
- Max. Current Draw: (13.8V Sinewave) 55 A @ 4Ω/ 85 A @ 2Ω / 90 A @ 4Ω Bridged
- Dimensions: (H x W x D) 1.7" x 4.25" x 12.3" (42.8 mm x 108 mm x 311 mm) Does not include harnesses
